The KidsEmbrace slogan is “Making Safety Fun,” they usually do! What might be more enjoyable than driving in a Batman automotive seat? How about Cinderella? KidsEmbrace has a stunningly giant number of automotive seats with characters on the duvet, they usually’re including extra on a regular basis. A couple of years in the past, we reviewed the original KidsEmbrace Combination Harness to Booster Car Seat. Since then, KidsEmbrace has made some essential modifications, so we needed to take one other look.
I used to be fortunate enough to be invited to the KidsEmbrace headquarters in Van Nuys, CA to study concerning the modifications to their automotive seats and see some of their other products. KidsEmbrace was good enough to outfit the “Bat Family” (us) with some of their new products to try out. As you’ll see under, they have been successful!
- 1 CSFTL Fast Stats
- 2 Measurements
- 3 Unique Options
- 4 Assembly
- 5 Set up
- 6 Fit to Youngster
- 7 Conversion to Booster Mode
- 8 Belt Routing, Adjustment, and Set up
- 9 Match to Youngster
- 10 Necessary Info: Where to Discover
- 11 Not Only Car Seats!
- 12 General Thoughts
- 13 Giveaway!
CSFTL Fast Stats
- Ahead dealing with weight range: 22-65 kilos
- Forward dealing with peak vary: 29-49 inches
- High back booster weight range: 30-100 pounds
- Excessive again booster peak range: 38-57 inches
- Lowest harness position: 13 inches
- Highest harness place: 17 inches (approximate due to the curvature of the seat)
- Highest booster belt guide place: 19.5 inches
- 7 yr expiration
- Lower anchor weight limit: 45 pounds
- Harness slots: 13 inches, 16 inches, 17 inches (prime slot is an approximate measurement due to the curvature of the seat)
- Crotch buckle slots: 5.5 inches and seven inches from the back of the seat pan
- Width at widest point (cupholders): 19.5 inches
- Inner seat pan depth: 11.5 inches
- Inner seat pan width: 10 inches at the baby’s hips, 11 inches on the youngster’s thighs
- Weight of the seat: 20 kilos
Orange lower anchor and tether webbing
We’re HUGE followers of this function! Each the decrease anchor webbing and tether anchor connector webbing at the moment are shiny orange. The top tether is important for safety, however sadly it’s typically forgotten when caregivers set up a ahead dealing with automotive seat.
The seat ships with the lower anchor webbing considerably hidden beneath, so the orange colour will assist caregivers find and use it. We applaud KidsEmbrace for these modifications!
In fact, this is probably the most unique function of all! KidsEmbrace automotive seats and booster seats function lovely character illustrations. There’s positive to be a personality to meet every youngster’s style. The paintings isn’t second-rate either; the seats are cozy to sit in (extra on that under) and interesting to take a look at!
The KidsEmbrace Combination Harness to Booster automotive seats want a bit of meeting out of the field. The headrest have to be hooked up to the seat.
To connect the headrest, line up the bottom of the headrest with the slot in the seat’s shell, then be certain that the tether anchor connector isn’t twisted. As soon as all the things is lined up, press the button on the bottom of the headrest and push the entire thing down. I felt like I needed an extra hand to do all of this stuff at the similar time.
Car Seat Belt
To put in the KidsEmbrace Combination Harness to Booster Car Seat with the car seat belt, place the seat on the car seat and have interaction the elective pink recline if desired. I find that any such recline is useful to line up the back of the automotive seat with the car seat again, though it does also help recline the seat a bit.
Hook the highest tether (in orange, did we mention that?) onto the tether anchor loosely.
Put the seat belt via the belt path and buckle. The guide is missing the essential subsequent step, which is to lock the car seat belt. We have now confirmed with KidsEmbrace that this essential step can be added to the guide. In most automobiles, the car seat belt locks by pulling it out all the best way.
After locking the seat belt, pull it tight and feed the slack again into the retractor. On many automotive seats, it helps to pull the shoulder portion of the car seat belt tight from contained in the belt path. On the KidsEmbrace Combination Harness to Booster Car Seats, there’s no direct method to access the belt path. KidsEmbrace informed us that they will be adding slits within the cowl because of this! We look ahead to this enchancment.
I did, nevertheless, discover a method to entry the belt path. Beneath the “arm” of the seat, there’s a small hole in the plastic shell. I was in a position to seize the shoulder belt from this area and pull it tight whereas urgent down on the seat.
After tightening the seat belt sufficient so the seat doesn’t move more than an inch aspect to aspect or front to back, pull the highest tether tight. I found the tether a bit troublesome to pull at first, because the “tail” to pull is sort of brief.
The lower anchor webbing stores in a location underneath the seat which could be very troublesome to entry. The truth that it’s now orange (have we talked about this? Perhaps a number of occasions?) helps considerably, but even so, it’s troublesome to unhook the lower anchor connectors from the seat. These lower anchor connectors have pink tabs to push moderately than the purple buttons we see on the premium lower anchors which might be discovered on many other automotive seats. It’s quite troublesome to wedge your arms in to press these pink tabs.
As soon as the decrease anchor connectors are released from their storage location, route the webbing by means of the belt path. This is not utterly intuitive, because the brief finish, the top that does not go through the belt path, could be very brief, and looks prefer it’s hooked up incorrectly.
After making certain that the webbing is through the belt path and not twisted, place the automotive seat on the car seat and have interaction the automotive seat recline if desired. Hook on the highest tether loosely. Connect the decrease anchor connectors to the decrease anchors within the car.
Getting the webbing installed securely took just a little ingenuity on my part, as talked about above. I reached underneath the arm of the seat to access the opening in the plastic shell. I used to be in a position to seize the lower anchor webbing from this space and pull it tight whereas urgent down on the seat. After the lower anchor webbing is pulled tight, tighten the top tether and check for movement on the belt path.
Fit to Youngster
The crotch buckle on the KidsEmbrace Combination Harness to Booster automotive seat has a quirk that we’ve seen on a number of convertible automotive seats.
When the crotch buckle place that’s closest to the kid is used, the buckle’s strap have to be shortened so that the metallic anchor is threaded via the highest of the farther slot. When the strap is in the farther slot, it’s at its regular size. Whereas this probably helps the seat fit its smallest occupants, it’s frustrating to not have an extended size obtainable within the crotch buckle slot that’s nearer to the kid. We asked KidsEmbrace about this rule, and we’re pleased to point out that because of our feedback, they’re presently testing the automotive seat with the crotch buckle on the longer size within the inside place. This variation HAS NOT been accredited yet, however we’re thrilled that they’ve thought-about our comments, and of course we’ll replace you if the change is authorised.
Twisty Harness Straps
In response to feedback concerning the harness straps twisting, KidsEmbrace has changed their harnessed seats over to a thicker black webbing that tends to twist less than the thinner variations. Sadly, we found that these straps still tend to twist. This is made worse by the fact that the strap covers are material tubes which don’t open, which suggests twists in that space are often not detected.
The guide doesn’t have any rules about how to regulate the headrest. We requested KidsEmbrace, they usually stated the headrest might be within the lowest or middle position for harness mode. If the headrest is contacting the child’s shoulders in the lowest position, it ought to be moved up a click.
Four Years Previous
This is my son. He’s 4.5 years previous, weighs 40 pounds and is 40 inches tall. The crotch buckle was too tight on him within the internal place, however he wasn’t ready yet for the outer position. The straps and headrest fit him nicely, and he was thrilled to be in a Batman seat!
4 Years Previous
Here we’ve another lovable 4 yr previous. She weighs 35 kilos and is 43 inches tall. She makes use of this seat extra commonly than our different models do, so we requested her mother for some additional suggestions!
Our mannequin can unbuckle and buckle this seat on her personal, which is very important to her. She will additionally use an UnbuckleMe to get the crotch buckle undone, and her siblings find it straightforward to assist her use the seat.
The chest clip is an effective measurement for her, and the seat is nicely padded for her slim body. The internal slot for the crotch buckle was slightly below her. Per the guide, utilizing the outer slot is the right selection.
Spidey has accompanied her household on a number of lengthy journeys and never as soon as has this kiddo complained about being uncomfortable. She loves that the cup holders are where she will attain them and are of a very good measurement.
She loves Spider-Man particularly, and actually, she has challenged caregivers to solely use Spider-Man on each experience! She feels safe when she’s in her Spidey seat, and it makes her completely happy to get within the automotive and go for a journey.
6 Yr Previous
That is my daughter. She’s 6 years previous, weighs 34 kilos (lighter than her younger brother!) and is 44 inches tall. The seat matches her properly in harness mode, and she or he found it snug. She’s skinny sufficient that the brief crotch buckle wasn’t a problem for her.
The top slots are VERY straightforward to miss. They’re hiding on the “shoulders” of the characters. They’re not much greater than the second set of harness slots, they usually supply about an inch more of torso room than the slots under them.
Conversion to Booster Mode
Changing the seat to booster mode was fairly straightforward. I unhooked the harness straps from the splitter plate in the back then pulled the harness straps by means of to the front of the seat. I removed the chest clip and buckles, then pulled out the straps from the back. The harness does not retailer on the automotive seat, so it’s essential to maintain monitor of all of the small elements, together with the white styrofoam blocks between the hip strap anchors and the back of the seat. A big labeled resealable plastic bag may be your good friend!
Belt Routing, Adjustment, and Set up
The shoulder belt is routed via a belt information which is hooked up to the underside of the headrest.
The headrest ought to be adjusted so that the shoulder belt is “above and centered on the child’s shoulder.” We have been glad to see a sticker on the back of the seat with this info.
The decrease anchors and the top tether may be used in booster mode, and the recline may be used as properly. The booster have to be buckled if not in use, if the decrease anchors will not be related.
Match to Youngster
5 Years Previous
This younger man is 5 years previous. He weighs 48 pounds and is 47 inches tall. His mom doesn’t assume he’s prepared for a booster seat, and based mostly on the amount he squirmed throughout our photoshoot, she could also be proper! However the car seat belt match him superbly.
6 Years Previous
Right here we again see my daughter. She’s 6 years previous, weighs 34 kilos, and is 44 inches tall. She doesn’t experience in a booster yet, but she was more than thrilled to mannequin one for this evaluation! Despite her small measurement, the car seat belt match her very properly.
9 Years Previous
This young woman is 9 years previous, weighs 59 pounds, and is 49 inches tall. The KidsEmbrace Combination Harness to Booster Car Seat (one other guest look on this evaluation from Spider-Man!) offers a superb car seat belt fit for her when the headrest is in the highest position.
No Car Seat Belt Retraction Points
It’s important that the car seat belt have the opportunity to retract, which means if the kid leans ahead in the booster then sits up (while the automotive is stopped in fact!), the belt must be sucked back in. With some mixture automotive seats, we see issues on this space due to the shape and positioning of the headrest. We didn’t see these points at all with the KidsEmbrace Combination Harness to Booster Car Seat. The belt guide is large and clean, and the belt passed easily by way of it.
Due to the shape of the character arms, it’s troublesome for many youngsters to reach underneath the arm and buckle the car seat belt. In fact, this step may also be completed by an adult.
Don’t be startled – as I used to be at first – to see a face in the rearview mirror!
Necessary Info: Where to Discover
Expiration Date: The seat has a 7 yr lifespan. The date of manufacture label is on the again of the seat’s shell. In addition, that info is embossed into the plastic on the again of the seat. We’d love to see the actual expiration date added to the label.
Guide Storage: I was excited to see a clearly marked guide storage pocket on the fitting aspect of the duvet when wanting behind the seat. Nevertheless, I had plenty of hassle truly inserting the guide into this pocket. I detached the duvet in that area, however I still was not in a position to match the guide in.
FAA Approval: The KidsEmbrace Combination Harness to Booster automotive seat is authorised to be used on aircraft in harness mode solely. That is clearly written in purple on a sticker on the again of the seat. Due to the width of the seat, it is probably not the only option for plane use.
Not Only Car Seats!
During my go to to the KidsEmbrace Headquarters, I used to be amazed at the big variety of products out there. With only a few exceptions, we don’t speak about products that aren’t automotive seats, however we needed to mention their broad vary of further merchandise for one key cause. Fairly than introducing character fans to mixture automotive seats earlier than it’s protected to achieve this, KidsEmbrace has chosen to introduce other age-appropriate merchandise for youthful youngsters so these kiddos know the model once they’re ready for a forward dealing with automotive seat. We applaud this strategy.
KidsEmbrace was good sufficient to permit my family to check out two further merchandise (apart from the Bat-seats!) – the deluxe Batman baby service with hood, and a Batman 4-in-1 Push and Experience Stroller Tricycle. Don’t inform anyone, however I feel my husband was excited to have a Batman product of his personal. He wore our youngest son in the Batman baby service. He reported again that it was very snug, and my younger son appeared snug in it as nicely. As for the tricycle, my son was thrilled with it, and we have been in a position to safely grab the handle if we would have liked to.
We give KidsEmbrace lots of credit score for making automotive seats – and different merchandise – that youngsters need to use! The KidsEmbrace Combination Harness to Booster Car Seats are colorful and enjoyable. We wish the installation have been a bit easier, but the orange tether and decrease anchor webbing are winners in our e-book. Booster mode is simple and problem free as nicely. We look forward to the set up enhancements on the horizon, and we’d be snug recommending these seats for anyone with the width within the automotive to accommodate them and perhaps a bit of additional time to spend on the installation. We wish a protected and fun journey to all our little superheroes!
Our pals at KidsEmbrace are freely giving one Combination Harness to Booster Car Seat to a fortunate reader! The winner might be in a position to choose any KidsEmbrace character, pending availability. We thank KidsEmbrace for this very beneficiant prize! Learn our phrases and circumstances, then enter under in your probability to win!
a Rafflecopter giveaway